Bifacial Technology Comparison: BC vs. TOPCon Performance Analysis
Release time:2025-04-24
Release time:2021-09-15
Author:
Author:
As photovoltaic technology evolves, the focus of Back-Contact (BC) technology has shifted from single-sided efficiency to dual-sided performance. Recent data indicates that BC modules can achieve bifaciality rates of 70%–75%, allowing for comprehensive power output that can, under certain conditions, match or exceed TOPCon modules. This trend underscores a shared industry recognition: comprehensive power and efficiency are the core metrics for evaluating photovoltaic performance, rather than front-side efficiency alone.

1. A Fair and Scientific Comparison
To ensure meaningful comparisons, it is essential to evaluate same-generation products under consistent conditions. The industry-recognized formula for calculating comprehensive power is:
Comprehensive Power=Front-Side Power×(1+Bifaciality Rate×0.135)
2. BC 1.0 vs. TOPCon 1.0
|
Module |
Front-Side Power |
Bifaciality Rate |
Back-Side Power |
Comprehensive Power |
|
BC 1.0 |
630W |
60% |
51.03W |
681.03W |
|
TOPCon 1.0 |
630W |
78% |
66.3W |
696.3W |
During the 1.0 era, TOPCon modules outperformed BC counterparts in overall comprehensive power, despite having the same front-side rating.
3. BC 2.0 vs. TOPCon 2.0
|
Module |
Front-Side Power |
Bifaciality Rate |
Back-Side Power |
Comprehensive Power |
|
BC 2.0 |
655W |
70% |
61.9W |
716.9W |
|
TOPCon 2.0 |
645W |
82% |
71.4W |
716.4W |
In the 2.0 era, BC and TOPCon modules achieve comparable comprehensive power, but differences in cost and actual energy yield remain significant.
4. Cost and Energy Yield Analysis
In terms of unit procurement cost, TOPCon 2.0 modules are priced at ¥451.5 per unit, whereas BC 2.0 modules range from ¥491.3 to ¥524, representing a 9%–16% premium. For a 100 MW solar plant, selecting BC 2.0 modules could increase total procurement costs by ¥5.5–10.07 million.
Additional considerations include:
(1)Low-Irradiance Performance: TOPCon modules generate approximately 1% more energy under low-light conditions, with greater advantages in low-irradiance regions (Class II and III).
(2)UV Degradation: BC modules experience 1.5%–2% higher UV-related degradation in the first year, affecting long-term energy production.
After accounting for these factors, TOPCon delivers 2%–3% higher energy yield per watt compared to BC, while also maintaining a cost advantage and proven industrial-scale manufacturability.
5. Conclusion
In bifacial applications, TOPCon modules demonstrate clear advantages in comprehensive power, customer cost, and energy yield per watt. With mature industrialization and reliable performance, TOPCon remains the preferred choice for diverse photovoltaic scenarios, offering both technical superiority and economic efficiency.