Stringer Machine - CTM-60BC BC stringer
Release time:2024-11-07
Release time:2021-09-15
Author:
Author:
The CTM-60BC stringer machine is an automated production device specifically designed for string welding BC cells in solar plate making machine, compatible with 166-230 mm (3BB-20BB) solar cells. The stringer can produce BC cell strings in sizes of 166-230 mm (half cells, 1/3 cells, and 1/4 cells). The equipment utilizes various advanced automation technologies, including PLC, servo systems, and machine vision, to achieve fully automated processing from cell loading to string unloading.
|
project |
Main technical performance indicators |
explain |
|
|
BC cell |
|||
|
Essential information |
Operation Ratio |
≥ 95% |
(1 Unplanned equipment downtime / 24H). Unplanned equipment shutdown refers to equipment failure or abnormal downtime |
|
Capacity |
166~182BC battery: Half-tablet> 6000 tablets / hour |
Depending on the welding process matching, the welding demand time is too long, which may affect the production capacity. |
|
|
Fragment rate |
≤0.25% |
Class A battery, thickness of 120 μ m The fragmentation rate of ultra-thin cells will rise. |
|
|
Check |
CCD |
|
|
|
Comprehensive positioning accuracy |
Location deviation: ± 0.1mm Angle deviation: ± 0.04° |
|
|
|
Welding agent method |
Welding belt soaking |
|
|
|
Welding method |
infrared welding |
Blue film face down, tooling pressure welding belt |
|
|
Temperature control accuracy |
±7.5℃ |
The upper computer can set the upper and lower limits of the temperature, when the temperature exceeds the limit, the equipment alarm. |
|
|
The battery |
Size |
166-230 mm BC cells And the corresponding half piece, 1 / 3 piece of the battery |
BC cell |
|
Number of main busbar |
3BB-20BB |
Different busbar switching requires the replacement of the tooling |
|
|
Cell thickness |
120um~200um |
|
|
|
Project |
Main technical performance indicators |
Explain |
|
|
BC cell |
|||
|
Solar Cells String |
String maximum length |
1400mm |
The whole long string is transformed and upgraded, and the maximum transformation can be 2500mm |
|
Head and tail welding strip extended length |
The first and last string extended length can be set separately |
|
|
|
String linear error |
±0.5mm |
|
|
|
Welding pull |
Welding tension 0.5N(0.6mm diameter flat welding belt, each gate line is allowed at most one point <0.5N); (0.6mm diameter flat welding strip) |
Mainstream Class A BC solar cell. |
|
|
Solar cell positioning mode |
Main busbar positioning |
/ |
|
|
Solar cell defect detection |
Can detect missing angle, edge collapse, cracking, screen deflection and offset, etc |
Can be defined on the upper computer computer screen |
|
|
Misalignment between ribbon and cell busbar |
≤±0.3mm |
The center line of the welding ribbon and the center line of the welding pad shall prevail |
|
|
Cell space |
Negative space: -1mm to-0.5mm Positive space: 1mm to 5mm |
Other space can be customized |
|
|
Cell space accuracy |
±0.3mm |
Based on cell cutting depth, screen printing accuracy |
|
|
The welding position |
Set it up as required |
/ |
|
|
Cell string out interface |
Can be docking typesetting machine can also be used standalone |
/ |
|
|
Maximum capacity of the basket feeder |
100 small solar cells |
/ |
|
|
Project |
Main technical performance indicators |
Explain |
|
|
BC cell |
|||
|
Solar Cells String |
String appearance inspection |
The battery string is in uniform welding state and meets the appearance requirements |
option |
|
String EL inspection |
False welding, hidden crack and other abnormal |
option |
|
|
String reject ratio |
≤3% |
Mainstream class A BC battery including virtual welding, welding, welding, etc |
|
|
Rework rate |
≤15% |
/ |
|
|
Welding ribbon |
Welding ribbon specifications |
Low-temperature flat welding strip: Width: 0.6 to 3.0mm; Thickness: 0.18 to 0.32mm |
Ribbon appearance requets: The surface is required to have no leakage of copper, tin beads, black spots, scars and tin slag exceeding the allowable deviation, the coating surface is bright metal color, and the winding line is flat and uniform. |
|
Lead and lead free |
Compatible |
|
|
|
Welding ribbon parameters |
Average thickness of tin layer: 0.018±0.005mm Copper substrate purity: 99.97% Extension rate: 20% Tensile strength: 150MPa Yield strength: 70MPa |
The thinnest average thickness of the tin layer is 0.006mm |
|
|
Welding ribbon tape specifications |
Inner hole diameter 16mm or 20mm, outer diameter 180mm and width 160mm |
|
|
|
Power supply and gas supply |
Electricity |
Three-phase, 380V, 50Hz Three-phase five-wire system (L1 / L2 / L3 / N / PE), incoming line size 4x16mm2 + 1x10mm2 |
|
|
Power |
The average power was 40kW and the peak power was 60kW |
|
|
|
Air supply |
Pressure 0.6-0.8Mpa; gas consumption: 1200 L/min; two φ 16mm hoses are used for the intake header |
Two φ 16mm hoses must be used to ensure the equipment pressure stability |
|
|
Air supply demand |
air pressure: 0.6-0.8MPa; Φ 16mm hose Compressed air quality requirements: Maximum solid particle: 15 μ m (level 3); minimum pressure dew point: + 3℃ (level 4); Maximum oil mist concentration: 5 mg/m3 (level 4) |
|
|
|
Project |
Main technical performance indicators |
Explain |
|
|
BC cell |
|||
|
Power supply and gas supply |
The exhaust system |
The diameter of the top exhaust pipe is Φ102mm, and the diameter is 104mm; the comprehensive exhaust discharge is greater than 600m³ / h; The exhaust gas temperature is high, and the exhaust pipe is recommended to use the PVC pipe |
|
|
Site |
The floor load at the installation site shall not be less than 600kg / m2, and the ground shall be flat without vibration. Installation space (including operation) is not less than 8600 (length) 3500 (width) 2650 (height) mm. Ambient temperature: 5-40℃ Relative humidity: 5-70% (no condensation) |
|
|
|
Parameter |
Equipment Size: 7900 (L) * 2510 (W) * 2500 (H) mm Weight: 7,000 kg |
||
ABOUT CHINTIYAN
Supplier of solar panel making machine,Photovoltaic module equipment manufacturing factory from China.
Customized solutions for solar panel production lines from 5MW to 1GW
Supply and delivery of nearly 30 types of equipment including Stringer Machines, Scribing Machines, IV Testers, and more
Optimization and upgrading of outdated solar panel production line capacity
Stringer Machine,BC stringer,solar plate making machine
Next Page
Next Page
