Non-destructive Scribing Machine for Solar Cell: Technical Analysis and Industry Application
Release time:2025-07-07
Release time:2021-09-15
Author:
Author:
Ⅰ.Core Principle: Laser thermal stress control fracture technology
Non-destructive scribing machine realizes non-contact cutting through the interaction between the laser and the material, and the core principle of the machine is laser thermal stress control fracture technology:
1. Laser heating: using high-energy laser beams to rapidly heat up the surface of the battery sheet, forming a local high-temperature zone.
2. Cooling induced stress: supporting cooling system (such as micron-level water mist or nitrogen) in the heating area behind the rapid cooling, resulting in uneven temperature field.
3. Thermal stress fracture: the compressive strength of brittle materials (such as silicon wafers) is much higher than the tensile strength, and when the tensile stress exceeds the fracture threshold of the material, the cracks are stably expanded along the laser path to realize non-destructive cutting.
4. Key innovation points:
Ultra-small notch guidance: Micron-sized notches are processed at the first and last ends of the cell to ensure precise control of fracture direction.
No heat-affected zone: the cutting surface is smooth and crack-free, and the loss of mechanical strength is less than 1/3 of traditional mechanical cutting.
Ⅱ.Technical Advantages: Comprehensive breakthrough in efficiency, quality and cost
High-efficiency Cutting:
Speed: the production capacity of a single machine can be up to 8,000 pieces/hour (e.g., ChinTiyan CTC-80S series), which is far more than the 2,000 pieces/hour of the traditional scribing machine.
Automation: Integration of the whole process of loading, cutting, inspection, and discharging, reducing manual intervention, with a update rate of ≥98%.
High precision and low damage:
Positioning accuracy: ±0.05mm (industry norm is ±0.1mm), support small pitch (≤0.5mm) battery string welding.
Fragmentation rate: ≤0.05% (TOPCon battery cutting), 80% lower than conventional processes
Cutting quality: Cutting surface roughness Ra ≤0.5μm, no micro-cracks, and mechanical strength improvement of 15%-20%.
Compatibility and Flexibility:
Size Compatibility: Supports 166mm-230mm cells, adapts to all types of high-efficiency cells such as PERC, HJT, TOPCon, IBC, etc.
Running Cost Optimization:
A,Simple Maintenance: Adopting standardized components, no special spare parts required, maintenance cost reduced by 40%.
B,Energy-saving design: air-cooled laser power consumption is reduced by 30%, water mist cooling system saves water by 50%.
Ⅲ.Typical application scenarios: full coverage from laboratory to mass production line
high efficiency battery cell production:
1.BC cell cutting: for the complex structure of the back-contact battery (such as IBC), the use of non-contact cutting to avoid electrode damage, yield increase of 5%.
2.Thin waferization: support ultra-thin wafer cutting below 120μm, hidden crack rate controlled within 0.1%.
Half-wafer/stacked-wafer module:
1. Half cell: the loss of electrical performance of the cell after cutting is <1%, and the power of the module is increased by 3-5W.
2. Stacked-watt module: High-precision cutting ensures cell edge fit, reduces series resistance, and increases module efficiency by 0.3%-0.5%.
Perovskite/Crystalline silicon tandem cells:
Flexible cutting: adapting to the composite structure of calcite layer and crystalline silicon layer, cutting heat-affected zone <10μm, avoiding inter-layer peeling.
Ⅳ.the industry's representative products: Take the Yuanwu series CTC-80S of ChinTiyan New Energy (Hubei) Co. Ltd. as an example
The technical parameters are as follows:
(1) Laser system: 70W MOPA pulsed laser (grooving) + 300W continuous laser (thermal cracking), beam quality M² <1.2.
(2) Cutting accuracy: straightness ± 0.05mm, repeat positioning accuracy ± 0.02mm.
(3) Capacity: 8000 pieces/hour (2-split mode), support 24 hours continuous production.
(4) Innovative design:
Belt transfer: reduce 3 times suction cup gripping, hidden crack rate reduced by 60%.
Common Spot Technology: Slotting and thermal cracking laser overlap, eliminating defects such as small chipped corners and chipped edges.
Digital MES system: real-time monitoring of cutting parameters, automatic generation of production reports, support for seamless connection with factory MES.
Conclusion
Solar cell non-destructive scribing machine has become the core equipment for high-efficiency battery production, and its technological breakthroughs not only promote the efficiency of photovoltaic modules, but also accelerate the global energy transition through cost reduction and efficiency. With the deepening trend of thinning and stacking, the non-destructive scribing machine will continue to evolve in the direction of higher precision, higher compatibility and lower cost, providing key support for the high-quality development of the PV industry.