Reasons for PV Frame Tearing

Release time:2025-06-07

Release time:2021-09-15

Author:

Author:


In coastal regions and northern areas with frequent strong winds, cases of photovoltaic (PV) module frame tearing are occasionally reported. From the perspective of the PV module itself, identifying the root cause is often challenging. Most PV modules on the market undergo strict mechanical load and wind resistance testing before leaving the factory and are theoretically designed to withstand Class 10 winds, or even up to Class 12 winds.

So why does frame tearing still occur in real-world applications?

Practical experience shows that the issue is rarely caused by the module itself, but is more often related to installation quality, structural design, and construction details of the photovoltaic power plant. A solid installation foundation is therefore essential. Below, we outline several key factors that commonly lead to PV frame tearing.

 

                                                                                    

 

 

Missing Bolts or Bracket Components

Missing bracket components or fasteners can significantly reduce the structural integrity of the mounting system. Even if the remaining bolts are fully tightened, the absence of a single support point can lead to loose connections.

Under strong wind conditions, this results in uneven stress distribution across the module frame. Localized stress concentration, especially along the frame edges, can eventually cause deformation or tearing.

 

Over-Tightened or Loose Bolts

Bolt installation torque is a critical but often overlooked factor.

Over-tightening may cause bolt deformation or micro-cracks, increasing the risk of breakage under wind loads or thermal expansion and contraction.

sufficient tightening allows slight movement of the module during wind-induced vibrations, accelerating metal fatigue and ultimately leading to structural failure.

Strict adherence to the specified torque requirements during installation is essential to ensure long-term system reliability.

 

Undersized or Improperly Installed Clamps

Compared with bolts, clamps are widely used because they provide better load distribution. However, undersized clamps with insufficient weight or contact area offer reduced resistance to wind uplift and shear forces.

In addition, improper installation—such as gaps between the clamp and the module frame—can significantly weaken the fixing strength. Under high wind pressure, these gaps amplify stress at the frame edges, increasing the risk of tearing. Selecting correctly sized clamps and ensuring full contact during installation are therefore critical.

 

Skewed or Misaligned Mounting Structures

The design and installation of mounting brackets must ensure overall stability and balanced load distribution. If the mounting structure is skewed or misaligned, the PV module will be subjected to uneven forces.

During strong wind events, a misaligned bracket cannot provide sufficient and uniform support, resulting in excessive localized stress on the frame. Over time, this imbalance can easily lead to frame tearing or even module detachment.

 

Conclusion

Passing high-level wind resistance tests does not guarantee system-level safety if installation quality is compromised. The structural reliability of a PV power plant depends on both product performance and proper installation practices.

In regions exposed to strong winds, salt spray, or extreme weather, greater attention must be paid to system design, component selection, installation procedures, and quality inspection. Only by building a solid installation foundation can the full performance of PV modules be realized and the long-term, safe operation of photovoltaic power plants be ensured.